What to do if your necklace is tangled? Tips to untie a knot in your necklace

Sometimes when wearing a necklace, you don’t untie it properly and it accidentally gets tangled. It is very difficult to untie it. You can use the following methods to untie it. Necklaces with delicate designs are most likely to get tangled. Remember not to pull them open with force.

1. Talcum powder method: When the necklace is accidentally tangled together, we can use talcum powder to help open it. The method is to put the necklace into a bag, then add talcum powder, shake it appropriately, open the bag after 3-5 minutes, and then the place where the necklace is tied together will become loose, and it will be much easier to open.

2. Fine needle method: Using the needle used to mend clothes at home can also help us untie the knotted necklace. The method is to insert the needle into the knotted part of the necklace, and then shake it a few times, and the knot will usually loosen.

3. Cooking oil method: Drop a few drops of cooking oil on the knotted location, then rub it slowly, the knot will become loose, but after opening it, you need to use a soft cloth to remove the grease, otherwise the oil will mix with the necklace and it will be uncomfortable whether you store it or wear it.

1. Spreading method:

You can lay the necklace flat and unfold it as much as possible, because this will allow you to easily find where the knot is. It can not only avoid more knots in the necklace, but also make it easy to untie the knot.

2. Lubrication method:

You can apply some lubricant on the necklace, such as baby oil or olive oil. Just one drop is enough. Then use your hands to gently rub the oil into the knotted area. When you feel the necklace is smoother, you can untie the necklace.

3. Needle picking method:

Use a thin needle to untie a knotted necklace. Insert the needle tip into the middle of the knot and move the needle back and forth continuously, so that the knot will become looser and looser. At this time, you can use one finger to try to separate the tangled necklace and then successfully untie it.

To fix the necklace in the box, you can use a rubber band. Fix the rubber band inside the necklace box, and then fix the necklace on the rubber band. This is not only beautiful, but also will not damage the necklace, and it can also prevent the necklace from getting tangled in the jewelry box. The tools needed to fix the necklace in the box are the necklace box, cardboard, scissors, and rubber bands. If there is something under the necklace in the necklace box, you can skip the cardboard step and just fix the rubber band inside. The way to fix the rubber band is to put the rubber band directly on the cushion inside the necklace box. First, take out the small cushion under the necklace box, then use two rubber bands to put on both ends of the small cushion, and then put the small cushion with the rubber band back into the necklace box. After arranging it, pass the two ends of the necklace through the rubber bands on both sides of the small cushion and fix it. If there is no small cushion in the necklace box, then use cardboard and scissors to make it. First cut the cardboard into the same size as the bottom of the necklace box, and then gently wrap the cardboard with a piece of white paper. If there is no white paper, you can also use a handkerchief. The handkerchief is softer than white paper and can better protect the necklace from wear and tear. After wrapping it, put rubber bands on both ends, put it in the box and put the necklace in it.

How to place necklaces in jewelry boxes

1. First, we should wipe the necklace clean with a dyed cloth to avoid stains and oil stains remaining on it.

2. Secondly, we need to pour out the dust or dirt in the jewelry box. If you don’t have a ready-made jewelry box at home, you can use some harder cardboard and cut it into a size similar to the jewelry box. Then fix two rubber bands on the upper and lower sides of the cardboard respectively, and then pass the necklace through the rubber bands to fix it.

3. Stand the box upright, then nail two nails on the top of the box and scrape the necklace on the upper line. This can also prevent the necklace from getting tangled together and also serve as a display effect.

4. You can also use common straws in life to help with arrangement. The method is to first cut the straw into the same length as the necklace, then put the necklace into the straw, and then fix the two ends at the two ends of the straw, so that it will not get tangled.