Should the number of sections on both sides of the watch strap be symmetrical? How to adjust the length of the watch strap?

In fact, watches are more particular than accessories. Watches are also a product that many people particularly like, and watch straps are extremely important for watches. So, do the sections on both sides of the watch strap need to be symmetrical?

The number of sections on both sides of the watch strap does not have to be symmetrical. The number of sections on the watch strap can be determined according to personal preference, because the length of the watch should be adjusted according to the position of the buckle, which is not closely related to the number of sections on both sides. Therefore, the number of sections on both sides of the watch strap does not have to be symmetrical.

Everyone has different habits, so we can choose whether the number of sections on both sides of the strap should be symmetrical according to each person's preferences. However, whether the number of sections on both sides is symmetrical has no effect on wearing the watch, because when wearing the watch depends on the position of the buckle. The strap of the stainless steel watch is one section at a time. When purchasing, the number of sections on the left and right sides are not symmetrical. One side will have more than the other side. The purpose is to prevent consumers from feeling tight when wearing the watch, so as not to cause problems such as poor blood circulation.

If you want to adjust the steel strap of your watch, you need to use professional adjustment tools. You can buy tools for changing watch straps online. Of course, you can also send it to a specialized watch repair shop for adjustment.

1. First, unscrew the handle of the prepared meter adjuster. There is a thimble inside, and you need to retract the thimble.

2. After putting it away, first align it with the pin of any section of the watch strap, then adjust the switch of the watch adjuster to unscrew the ejector pin, so that the watch strap will be opened.

3. You should know that the watch strap is connected by many small pins. You can remove the excess ones according to the actual length.

4. At the same time, we must also pay attention to the direction and position of the watch strap when placing it into the watch adjuster, and also pay attention to the method. We cannot push it in from the side of the straight line.

5. After adjusting the length of the watch strap, press the opposite direction of the arrow, install the card pin and strap, and restore it to its original state.

If you wear a watch for a long time, the strap will inevitably get some dirt and turn black. So how do we clean the strap? In fact, it is very simple. As long as the dial is not exposed to water, it can be easily cleaned. First, we can use daily cleaning items and put them in clean water. Then use an old toothbrush to clean the dust inside the strap. You can dip a small amount of soapy water. Finally, after washing quickly, wipe off the excess water with a paper towel. In this way, we can simply clean the strap.

Metal watch straps need to be checked regularly to see if there are complete steel nails and spring bolts on the straps. If they are missing, you need to go to a watch repair shop to install them as soon as possible to prevent the watch from falling off over time. If the steel nails often fall off, you need to check whether the steel nail holes are loose. Metal watches should be worn in summer as much as possible. Wearing them in winter will be too cold and bad for bones. It is best to use a leather belt in winter.

Problems are very likely to occur at the folded part of the watch strap, which is related to your normal wearing habits. Be gentle and don't use too much force when opening or closing the watch strap. Don't drop the folded part. Don't let the watch strap be subjected to too much tension or torque, as it will easily loosen the watch strap. Also, don't let the watch strap come into contact with water, as it will react with the metal.