What glue should I use to fix the glue on my sports shoes? Never use 502

If you don't take good care of your sneakers when wearing them, they are prone to debonding, and it is very troublesome to repair them after they have debonded. Below, the editor of No. 5.com will tell you what kind of glue to use when sneakers have debonded?

What glue to use for degumming sports shoes

If your sneakers are cracked, I recommend using bicycle repair glue. This glue is easily available at hardware stores. However, there is a disadvantage: the glue left at the edge of the crack after repair will become hard and yellow, and you need to use a small file to remove it.

In the production of shoes, there is a procedure to glue the upper and the bottom glue together. At this time, if the factory's raw material selection, improper process control and many other reasons may cause the shoes to come unglued. When it comes to glue, many people will think of the fighter 502 among glues. Indeed, its bonding ability is unquestionable, but can it be used to glue sports shoes? Can 502 be used if the glue of sports shoes is coming unglued? The answer is no. Because 502 is not a special glue for shoes, and using it to glue shoes will harden the shoe material, which will damage the shoes in the long run.

How to fix the glue on sports shoes

1. Use dry cotton cloth or sandpaper to remove dust, oil, rust, etc. on the bonding surface, and then wipe it with a treatment agent or cleaning agent to clean the bonding surface and increase the bonding strength.

2. Unscrew the front cover and you can use it. If there is glue on the bottle mouth, wipe it clean with cotton cloth first, and then put on a needle or PE dropper before use to control the glue flow and ensure the bonding effect.

3. Drop a small drop on the bonding surface, immediately bond and press tightly, and keep until hardening, the hardening time varies from a few seconds. It will reach practical strength in about 30 minutes, and the highest strength will be obtained after 24 hours. Clean the bottle mouth after use and tighten the lid. Store in a cool and dry place.

How to maintain your sports shoes when not wearing them

1. Take out the insoles and place the shoes in a ventilated place to allow the heat to dissipate and return to their original state.

2. Use neutral detergent for washing, place in a ventilated and dry place to dry, and avoid direct sunlight. Long-term exposure to sunlight will cause the shoe surface to discolor or damage the shoe surface structure, shortening the service life.

3. Try to avoid squeezing and keep the shoes in their original condition.

4. When not in use for a long time, wash and dry it, wrap it with paper and store it in a dry place.

5. Avoid high temperature baking.

Precautions for drying sports shoes

1. Shake the shoes to dry. This doesn't mean you have to put them in a washing machine. You can squeeze out some water from the front and back of the shoes with your thumbs. Then grab the middle of the sole, with the heel facing forward and the toe facing behind you, and start swinging your arms back and forth a few times. The more times you shake, the better for the shoes.

2. You can use shoelaces to pierce a few holes at random, then tie them to a triangular clothes rack, and hang a shoe on each side like clothes on a drying rack in a ventilated place that is not exposed to the sun to dry. For genuine leather shoes, it is best to prop up the inside of the shoes with paper balls or shoe racks to prevent serious deformation.

3. Excessive direct sunlight, heat from a hair dryer, and improper care methods will reduce the service life of the shoes. Therefore, after cleaning, place the shoes with the toes facing down in a ventilated place to dry. Drying the shoes at room temperature can prevent water from seeping into the midsole foam material.