How long does it take for a nail lamp to age? How often should a nail lamp be replaced?

The nail lamp will age after each use, so it needs to be replaced in time. Generally speaking, how long can the nail lamp be used? How often should the nail lamp be replaced?

The LED lamp beads in nail lamps have a lifespan. Ordinary lamp beads will begin to decay after 3000-5000 uses, and export-grade lamp beads will also begin to decay after 5000-7000 uses.

After attenuation, the brightness visible to the naked eye does not decrease, but the ultraviolet energy emitted becomes very low, and may not even dry your nail polish.

So some people may wonder why the nail polish that was originally very strong suddenly became loose. Is there something wrong with the glue? In fact, it is the lamp that has a problem.

For those who have just opened a shop, it is recommended to completely replace the lamps every one to one and a half years to avoid affecting the reputation.

Generally, there are four lamps in a nail lamp, each lamp is 9W. Please replace the lamp regularly every 6 months. Be careful not to look directly at the UV lamp. Use it according to the gel production manual or the instructions of the UV lamp. Do not shorten or exceed the use time to maintain the best effect.

If the nail lamp is not on, it may be because there is a problem with the parts inside the machine. The most effective way is to contact after-sales service in time. The nail lamp is a high-power lamp that has a good irradiation effect on the deep layer of the skin. The nail lamp not only has the effect of setting the nails, but also some substances added to the nail lamp have the effect of disinfecting and sterilizing the nails.

When applying nail seal, insufficient lighting time will cause the seal to not dry. Correct and standardized use of nail lamps can keep nails longer. In addition, for scrubbable seals, insufficient alcohol concentration or insufficient scrubbing times will also cause the seal to not dry and become dark yellow. When using a scrubbable seal, wait for a few seconds before wiping it clean with a cotton pad. Scrub twice and use 95-degree high-concentration alcohol to clean to ensure a brighter seal.

Sealing usually requires a long time under the nail lamp, three minutes under the UV lamp, and 90 seconds under the LED. Many nail lamps are not powerful enough, so when using a nail lamp for sealing, the time should be appropriately extended. After the sealing layer is evenly applied, the nail lamp should be used for baking, which is more conducive to the long-term preservation of the nails.

The lamp will age over time, which will have a significant impact on the nail art seal. If the lamp is used frequently, it is recommended to replace the lamp every two months to ensure the normal nail art seal. When irradiating the nail lamp, place your fingers flat in the lamp, paying special attention to the position of the thumb. You can irradiate the thumb nail once more after the seal.

Nail lamp, also known as nail phototherapy lamp. It is specially used for drying phototherapy glue in the nail process and is mostly used in nail salons. In some manicure processes, a layer of nail phototherapy glue will be applied on the nails, which is similar to nail polish, but it is less likely to fall off than nail polish. It can generally last for more than a month and is more expensive than nail polish. It is generally only used in professional nail salons because nail phototherapy glue must be used with a nail lamp, that is, a nail phototherapy lamp. There are two types of nail lamps, one is an ultraviolet lamp and the other is an LED lamp. The main peak wavelength of ultraviolet light = 370nm (this wavelength is visible light, harmless to the eyes, but it is recommended not to look directly at the lamp for a long time), but it can have a good drying and sterilization effect.