What if there are particles in the nail polish? What if the nail polish is a bit sticky?

Nail polish is a product that is very different from nails. People who have used nail polish know that it is not easy to apply. So here we need to understand what is the matter with nail polish particles? What should I do if nail polish is a bit sticky?

After grinding, the dust is not removed with a brush. If the dust is not completely removed, particles will be generated. The speed of application is too fast, which is easy to produce bubbles and particles. The bottle mouth has not been cleaned for a long time, and the residue at the bottle mouth is brought into the bottle by the brush. When applying, the brush or the bottle mouth is illuminated by the phototherapy lamp, causing the glue on it to solidify and then be brought into the bottle. Control the speed and strength of application and keep it steady. The brush must be light when applying to avoid bubbles. After grinding, first use a brush to remove dust from the surface, and then use cleaning fluid to clean the surface. Control the speed and strength of application and keep it steady. The brush must be light when applying to avoid bubbles. Clean the mouth of the nail polish bottle regularly and regularly to reduce or remove the presence of residue. When using, please turn the open lid of the nail polish away from the light source of the phototherapy lamp to avoid easy solidification.

First, take out the nail polish diluent and pour it into the bottle of nail polish, about 3 drops. The specific dosage can be adjusted according to the degree of drying of the nail polish; then cover the bottle cap of the nail polish, put the nail polish on the palm of both hands and rub it back and forth for a few minutes; finally, let the nail polish stand aside, and it can be used in about 2 hours. Avoid contact between nail polish and ultraviolet light. Nail polish cannot be placed directly in a high temperature or low temperature environment. After each use of nail polish, make sure that the bottle is sealed to avoid direct contact between nail polish and air for a long time. The main components of nail polish are some pigments and natural resins. This material will solidify under ultraviolet light. The biggest difference with nail polish is that nail polish will evaporate, while nail polish will not have any harmful gases that we will inhale. Nail polish will form a plastic-like film with worse permeability than nail polish, so it will not corrode our nails, and we usually need to shine light when doing manicures, so that our nail polish can be dried quickly. Therefore, nail polish does not cause any harm to our nails.

Clean the brush in time and use clean water (high quality) or 99% alcohol to clean the surface of the nails to reduce dust and grease. Excessive vibration will produce a large number of bubbles. Taking it out immediately will cause the surface of the nail to be uneven. If you encounter such a problem, you must deal with it in time. Use a glue brush to lightly touch the bubble and brush it down quickly. It is also easy to produce bubbles if the speed is too fast. Control the strength and speed, and the problem will be solved by applying it at a uniform speed. Our nail surface will secrete a layer of grease to protect the nails. Before doing manicure, we must use alcohol to wipe off this layer of grease. After wiping, we also need to use a "sponge" to polish it to make the surface rougher and more suitable for the adhesion of the base glue. The polishing should be uniform. If the polishing is not in place, it is easy to curl up from the local area or even fall off the whole piece. After polishing the nails, some dust will remain on the nail surface. At this time, we need to use a cleaning broom to clean the nail surface, or scrub it with alcohol. Never touch it with fingers or oily substances.

When applying nail polish, you should first clean the surface of the nails and clean the dead skin and dust on the nail epidermis. Then apply a thin layer of base gel on the surface of the nails, and then shine the lamp for 30 seconds before taking it out, and then apply colored nail polish. Just apply a thin layer, don't apply it too thickly, about one minute, and then apply the second layer of nail polish. After shining the lamp for one minute, apply the last layer of nail polish to increase the smoothness of the entire nail polish, and then shine the lamp for two minutes. After that, wipe the surface of the nail with alcohol and the entire process of applying nail polish is complete.