How to clean dirty white shoes? Precautions for cleaning white shoes

White shoes are versatile and can often be seen in fashion magazines or street shots. Although white shoes are simple and good-looking, they are troublesome to clean and maintain, especially white mesh shoes.

To clean the mesh of white shoes, you need to prepare the following materials and tools: brush, high-efficiency shoe cleaner, clean water and rag. The specific cleaning method is as follows:

1. First, take out the prepared materials and tools.

2. Next, add a few drops of high-efficiency cleaning agent into the clean water.

3. Then use a brush to dip into clean water with detergent added.

4. Next, you need to scrub the midsole of the shoe.

5. Then you need to wipe off the foam on the soles with a towel.

6. Next, you need to use a soft-bristled brush dipped in detergent to wipe the upper of the shoes.

7. Then wipe the shoe surface clean with a towel.

8. Finally, the mesh surface of the shoes is cleaned. When cleaning the mesh surface of mesh shoes, you must use a soft-bristled brush. Using a hard-bristled brush can easily damage the mesh surface of the shoes. When brushing, use gentle force and do not use too much force.

The washing temperature should not exceed 45 degrees. Most synthetic materials will change under high temperature. Therefore, whether wearing or washing, the ambient temperature should be less than 45 degrees. This is why you should avoid hot water and exposure to the sun after washing. The chemical agent should be cleaned, otherwise the shoes will turn yellow. The edges of white sports shoes are prone to yellowing because of the chemical components in the washing powder and a little rust in the water. You can use facial tissue or toilet paper to attach to the surface, but this is not the best way. If the shoes have turned yellow, you can buy some lead powder in the store and brush it on immediately after we wash the shoes. Then wrap the shoes with white paper towels and finally put them out to dry, but it is not suitable to be exposed to the sun at this time. Or white shoe powder, after washing the shoes, apply white shoe powder on them, then cover them with toilet paper and dry them. If you can't buy white shoe powder for the time being, you can also use the water alkali on the wall of the kettle instead. That is, we drain the water alkali and grind it into fine powder, and apply it on the cleaned shoe surface, so that the shoes can be as white as new. Genuine leather/artificial leather requires special care. It is not easy to maintain the upper of genuine leather because it is easy to wrinkle and is not suitable for contact with water. Therefore, it is safer to use wiping method to clean.

Use some nail polish remover to drop on the cotton pad, and then wipe the mesh of the white shoes. Use an eraser to wipe the white shoes. Pour a little laundry detergent on the toothbrush, and dip it in some water, then use the toothbrush to brush the blackened areas of the mesh of the white shoes. When brushing, you need to pay attention to the foam before washing it with clean water.

You can apply a layer of toothpaste on the shoes, then wrap the shoe body with toilet paper. At the same time, press the paper with your hands to make the shoes with toothpaste and the toilet paper stick together. Then put them in the sun to cool for three hours. After two to three hours, tear off the toilet paper little by little, and you will find that the toilet paper turns yellow and the shoes become very white.