Why is there fog inside the watch? What should I do if there is fog inside the watch?

Generally, watches are sealed and will not contain water vapor. Fog inside the watch means there is moisture inside the watch. Water may get into the watch when you wash your hands, wash clothes or encounter rainy days.

If there is fog in the watch, it means there is water inside the watch. Generally, although the watch is sealed, there are still very tiny pores at the joints of the watch case, especially in used watches, the pores are larger. When washing hands or clothes or encountering rainy days, water can enter through these pores, especially the hot steam in the kitchen, which is more likely to penetrate into the watch case. In addition, the temperature is high and the humidity is high in summer. If the watch is suddenly cold, the air with more water in the watch will condense into fog or water droplets and stick to the inside of the watch glass. If fog and water droplets appear in the watch, it should be repaired in time and wiped off to prevent water from entering for a long time, rusting of mechanical parts, and discoloration of the surface. If there is a little fog occasionally, it will disappear naturally after the climate is dry, and it will not have a big impact on the movement.

Wear the watch upside down, with the side that you see the clock against your hand. Your hand will be warm, and the fog inside will be forced out. There are hot water bottles at home. It's cold in winter, so putting the side of the watch that sees the clock against the hot water bottle can also remove the moisture inside.

1. If the watch is soaked in water, wrap it tightly with several layers of toilet paper or moisture-absorbing flannel, place it about 15 cm away from a 40-watt light bulb, and bake it for about 30 minutes to eliminate the moisture in the watch.

2. Put it in the rice jar and bury it deep in the dry rice for a while. If you are quick, you can see obvious results in one night.

3. You can put a granular substance called silica gel together with the watch that has accumulated water into a sealed container. After a few hours, take out the watch and all the water will disappear.

4. Use a hair dryer to dry it, and then apply a layer of transparent nail polish on it to prevent impurities from entering and prevent rust.

5. If there is water vapor in the watch, you can wear it on your wrist with the watch case facing inward and the bottom case facing outward. The water vapor will be eliminated in two hours. If too much water enters the watch, you need to open the watch case and clean it. If you are not sure about how to handle it yourself, you should send it for repair in time.

1. First, pick up the watch and adjust the strap length to suit your size by hand.

2. Then, reach into the strap to adjust the length.

3. After putting it on, pull one side of the strap with your hand to move it closer to your wrist.

4. Pass one end of the canvas strap through the iron ring.

5. Pass the fixing pin through the hole.

6. Once secured, place the remaining strap into another canvas loop.

1. Toothpaste can easily clean the canvas strap. In fact, you only need to squeeze toothpaste on a discarded toothbrush, then use the toothbrush to directly wipe the surface of the canvas strap, and then wash it with clean water.

2. You can easily clean the dirt on the canvas strap with soap. Just soak the canvas strap in soapy water, brush the soap surface with a toothbrush, and then scrub the canvas strap. When a lot of foam is produced, you can wash it with clean water.

3. You can easily remove the dirt on the canvas strap with a cleaning agent. The cleaning agent can be laundry detergent, just apply it on it, and then wipe it with a sponge rag, and it will be clean after wiping it more.

4. Use detergent to clean the dirt on the canvas. Detergent is very useful! Even if there is oil on the canvas, it can be easily removed, and the smell is not bad.